![]() # syntax: SPN Number TranslationLanguage0 TranslationLanguage1 Here are some examples for two languages: If the project is a multi-language project, other language translations can be added to the existing lines. The Translation File is valid for both DM1 and DM2 messages. SPNFMI 0x0b 521 0 Pedal position too high #Syntax: SPNFMI ECUAddress SPN FMI FMITranslation FMI to FMI Description (general or SPN specific)Įxample content of a translation file (for one language):.In the translation file the following translations can be made: Using a translation file can make the viewing of the trouble codes easier. ![]() ![]() When changing the CAN port you can choose to apply the settings you have made for the current CAN port. Only CAN ports that have a J1939 protocol attached are available. Select the CAN port for which you want to configure the DM settings. To open the settings dialog use the main menu tab Communication | Protocols | J1939 | DM1 / DM2 Settings.Ī description of all available settings follows here: Common Settings for DM1 and DM2 Select CAN Port We will focus on products newer than 1996, which is why only version 4 is supported. "Effective 1996, Version 4 shall be used for all future OBD applications" Please note that only conversion method 4 is used for the processing of DM1 messages. ![]() Tutorial video about setting up J1939 DM1 / DM2įor receiving and displaying the contents of DM1 and DM2 messages various settings can be made.
0 Comments
Leave a Reply. |